Barbecue Grill - SEVERIN PG 8539 Instrucciones De Uso

GB

Barbecue grill

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
General information
The barbecue grills are available in
different configurations.
Check which of the diagrams (I - III)
corresponds to your grill before fitting
any accessories.
Depending on the model, the grill may
be provided with a wind shield, and the
grill rack with a separate handle
Grill models with additional base stand:
Assemble the base stand according to the
schematic diagram IV. Depending on the
model, a warming rack may be included
with your grill.
Then place the grill onto the stand. The
small feet under the grill connect with the
tops of the vertical legs of the base stand.
Ensure that the grill and base stand are
placed in a safe and stable position.
The power cord should be routed in such a
way that no one is likely to trip over it.
Important safety instructions
∙ This appliance is
designed for outdoor
use only; it must not be
operated within enclosed
spaces.
∙ The equipment should
only be connected to an
earthed socket installed
in accordance with the
regulations. It must
be operated with an
additional earth-leakage
circuit-breaker with a
rated tripping current not
exceeding 30mA.
∙ Make sure that the supply
voltage corresponds with
the voltage marked on the
rating label.
∙ The power cord should
be regularly examined for
any signs of damage. In
the event of such damage
being found, the appliance
must no longer be used.
11