Trouble-Shooting; Solving Problems Yourself - SEVERIN SM 3710 Instrucciones De Uso

7

Trouble-shooting

7.1 Solving problems yourself

WARNING
Risk of injury. The unit does not contain any components that you can service or repair yourself.
– Never use a defective appliance.
– Do not attempt to carry out any repair work yourself. If a defect is found, contact our Customer
Service Department (see Customer service on page 170).
Before you contact our Customer Service or send the appliance in, please use the following table to check whether
the problem can be solved at home.
Problem
The appliance does not
operate.
The appliance stops
suddenly.
The motor unit becomes
hot.
HINT:
– If the suggestions in the table do not lead to a satisfactory result and the problem persists, contact
our Customer Service Department (see Customer Service on page 170).
– Should you require replacement parts or accessories for your appliance, please visit our online
shop under the section 'Service /Ersatzteilshop' on our website www.severin.de.
Cause
The power plug is not
inserted/ the unit is not
connected to the mains.
The unit has not been
correctly assembled.
Some ingredients have
become stuck.
The appliance has been
operated for too long.
Remedy
Insert the plug into the wall outlet.
Turn the blender jug clockwise until it locks into place.
Set the rotary control to its OFF position. Remove the plug
from the wall socket. Detach the jug from the motor unit.
Use a long wooden spoon to remove any blockage.
Turn the unit off. Remove the plug from the wall socket.
Wait for 30 minutes, until the motor unit has cooled down
suffi ciently.
27