SMA SUNNY TRIPOWER Serie Instrucciones De Instalación página 15

SMA Solar Technology America LLC
Position Designation
D Additional label with details for registration in Sunny Portal:
• Internet address of the PV System Setup Assistant
• Identification key (PIC)
• Registration ID (RID)
E Ventilation grid
F Recessed grips
G LEDs
The LEDs indicate the operating state of the inverter:
• Green LED is glowing: operation
• Green LED is flashing: the requirements for the connection to the utility grid
have not been met or the inverter has reduced its output power due to
excessive temperature.
• Red LED is glowing: an error has occurred that must be rectified by a qualified
person (see Section 10 "Troubleshooting", page 41). You will find the
detailed error message in Sunny Portal or Sunny Explorer.
• Blue LED: no function
H Lower enclosure lid
Symbols on the Inverter and on the Type Label
Symbol
Installation Manual
Explanation
Inverter
This symbol is located next to the green LED which indicates feed-in oper-
ation of the inverter.
Observe the documentation
This symbol is located next to the red LED which indicates a fault or distur-
bance (see Section 10 "Troubleshooting", page 41).
Communication
This symbol is located next to the blue LED.
The product does not have a transformer.
Equipment Grounding Terminal
Danger to life due to electric shock
The product operates at high voltages. All work on the product must be
carried out by qualified persons only.
4 Product Description
STPTL-US-10-IA-xx-17 15