Trouble Shooting - Tennant 2260 Manual Del Operador

TROUBLE SHOOTING

PROBLEM CAUSE
Machine does not Faulty power cord.
operate.
Tripped circuit breaker.
Tripped building circuit breaker.
Faulty machine wiring.
Faulty On/Off lever switch.
Faulty motor.
The cord connection between the handle and
base is not correctly inserted.
Machine operates Soiled Pad.
with a wobble or jerky
Improper pad/brush for application
motion. motion.
Pad driver/brush not installed correctly.
Pad/brush unevenly worn.
Pad not properly centered.
Machine circuit Heavily soiled pad/brush.
breaker trips
Improper pad/brush for application
continuously. continuously.
Defective circuit breaker.
Worn carbon brushes in motor.
Tennant 2260/2270 (10–02)
Home Find... Go To..
SOLUTION
Contact Service Center.
Reset circuit breaker on machine.
Reset circuit breaker in building.
Contact Service Center.
Contact Service Center.
Contact Service Center.
Ensure correct cord connection.
Replace Pad.
Change to proper pad/brush.
Remove and reinstall pad driver/brush.
Replace pad/brush.
Remove and reinstall pad.
Clean or replace pad/brush.
Change to proper pad/brush.
Contact Service Center.
Contact Service Center.
OPERATION
15