Steelcase Ology Instrucciones De Uso página 19

_______________________________________________________________
one desktop height. As a result, up to two memory
positions can be entered.
To save a desktop position, proceed as follows:
 Move the desktop to the
 Press MEM1 for memory
 Press MEM2 for memory
When all 3 light bars light up,
the position is saved.
Calling up a memory position
This function is used to set a saved desktop position.
To set a saved desktop position, proceed as follows:
 Press the operating panel "up"
or "down".
Deleting the memory position
This function allows you to delete the stored desktop
positions.
To delete a stored desktop position, proceed as
follows:
 Press the MEM1 and
 "PRESET CLEAR" ap-
 The stored heights are
Setting the reminder function REM
This feature allows you to set a time when you want
to be reminded to change your position.
To set a saved desktop position, proceed as follows:
120917
height you want.
position 1.
position 2.
MEM2 buttons simulta-
neously.
pears on the display.
deleted.
Operating and adjusting
Press the REM button
display will show the timer logo
and the current memory time.
Press this button to set the
interval for how often you want to
receive a reminder to change
position.
The six intervals are:
- Interval 1: Reminder after 15
minutes of sitting
- Interval 2: Reminder after 30
minutes of sitting
- Interval 3: Reminder after 45
minutes of sitting
- Interval 4: Reminder after 60
minutes of sitting
- Interval 5: Reminder after 75
minutes of sitting
- Interval 6: Reminder after 90
minutes of sitting
When the light bar fills up, the
reminder interval is stored
If no action is taken within 2 minutes
after the reminder, the reminder function
will turn off automatically.
Always have the desk move up or down
until the desired or programmed height is
reached and the desk stops. This ensures
that the desk is horizontally aligned
(level) in the case of a one-sided load.
Bluetooth function und pairing
This function allows you to establish a BLUETOOTH
connection between the desk controller and a mobile
device with Bluetooth function.
Please note that a connection to the desk
can only be established using the
Steelcase Rise App.
To connect, proceed as follows:
and the
17