Operating And Adjusting; Safety Instructions; Desk Height Adjustment; Basic Variant - Steelcase Ology Instrucciones De Uso

_______________________________________________________________
5 Operating and
adjusting

5.1 Safety instructions

The Ology desk may only be used and operated
when in a technically perfect condition and in
compliance with the user manual.
Before changing the height of the desk, ensure that:
■ The desktop must be horizontal. In case of
uneven floors, you can adjust the height using
the adjusting screws on the feet.
■ That no persons or objects (e.g. open doors or
windows) are in the lifting range, or protrude
into the lifting range.
■ No one is on the desk.
■ The maximum permissible load-carrying capacity
of the desk is not exceeded.
Danger due to voltage!
Contact with voltage can cause severe
injury or death by electric shock!
Attach or detach

connectors only when the
equipment is de-
energised.
 Do not open the housings
of the following
components:
Controller
–
Columns
–
Control panel
–
Danger due to voltage!
The metal parts of the desk
can become energised if live
cables and connections are
damaged.
Do not earth electrical devices on the

desk frame.
12

Operating and adjusting

Risk of injury or damage!
When loading the CPU holder with

weight that is higher than the approved
weight, the fastening screws can tear.
Risk of injury or damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
Always take hold of the desk at the

underframe to transport or move it.
Ensure that the connecting cables of all
devices on the desk are long enough.
Optimum desk height
The adjustment to the optimum desk height (sitting
height) is crucial for the correct sitting posture at the
workstation. The correct desk height setting for the
workstation can be found in the workstation analysis
(pursuant to the German Occupational Safety and
Health Act, the German VDU Ordinance, or accident
prevention regulations, for example). See also BGI
650: Screen and office workstations. Design
guidelines.

5.2 Desk height adjustment

Height adjustment of the Ology and Ology Bench
desks is done in the same way. In the illustrations,
variants of the Ology desk are used.
Basic
5.2.1 variant
The desk has a fixed height of 740 mm. With the
exception of height adjustment for uneven floors, the
desk height cannot be adjusted.
Telescopic
5.2.2 variant
The desk can be adjusted to a height between 620
mm and 900 mm with an adjustment wheel.
120917