General Information - Hilti XBT 4000-A Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
XBT4000-A drill
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
with the tool.
Ensure that the operating instructions are
with the tool when it is given to other per-
sons.
Operating controls and components
On / off switch (with electronic speed control)
Lockbutton for sustained operation
Chuck
Cooling air exit
Rating plate
Gearing
Scaffold hook
Belt hook
Motor
Grip
Battery release button
Motor cooling air intake
Contents

1. General information

2. Description
3. Insert tools and accessories
4. Technical data
5. Safety rules
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools
12. Declaration of conformity (original)
Printed: 08.07.2013 | Doc-Nr: PUB / 5071408 / 000 / 01
1. General information
1.1 Signal words
-CAUTION-
Used to draw attention to a potentially dangerous situ-
ation which could lead to minor personal injury or dam-
age to the equipment or other property.
-NOTE-
Used to draw attention to an instruction or other useful
information.
1.2 Pictograms
Warning signs
General warning
Obligation signs
Wear eye Safety helmet
protection must be worn
Symbols
Read the operating
instructions before
use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying the
operating instructions.
In these operating instructions, the designation "the tool"
Page always refers to the XBT 4000-A with battery fitted.
11
Location of identification data on the tool
12
The type designation, item number, year of manufacture
12
and revision level are printed on the type plate on the tool.
13
The serial number can be found on the left side of the
14
motor housing. Make a note of this information in your
16
operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
16
department.
18
19
Type:
19
20
20
Serial no.:
Warning: electricity
Warning: caustic
substances
Wear Wear ear
breathing protection
protection
Return waste material
for recycling.
XBT 4000-A
en
Wear
protective
gloves
11