Technical Data - Hilti XBT 4000-A Manual De Instrucciones

4. Technical data

XBT 4000-A drill
Rated voltage
Drill bit diameter
Torque
Speed
Speed control
Dimensions (L×W×H)
Weight in accordance with EPTA-procedure 01/2003
Gearing section sealed to prevent ingress of dust and permanently lubricated to avoid the need for maintenance
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information (measured to EN 60745):
Typical A-weighted sound power level:
Typical A-weighted sound pressure level:
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Triaxial vibration value (vibration vector sum)
Measured in accordance with EN 60745-2-1 prAA: 2005
Drilling in metal, (a )
h, D
Uncertainty (K) for triaxial vibration value
Battery SFB 185
Rated voltage
Capacity
Weight
Temperature monitoring
Type of cell
Number of cells
Specifications are subject to change without notice
Printed: 08.07.2013 | Doc-Nr: PUB / 5071408 / 000 / 01
18 V DC –––
- - -
5 mm (main applications 4 mm dia.)
< 6 Nm
0–4000 r.p.m.
Electronic, using ON/OFF switch
250×69×265 mm
2.5 kg
86 dB (A)
75 dB (A)
< 2.5 m/s 2
1.5 m/s 2
18 V DC –––
- - -
18 V × 3,0 Ah = 54 Wh
1.15 kg
yes
SCB C nickel metal hydride
15
en
13