Tabla de contenido
Publicidad
Troubleshooting
f
Condition
The needle thread
breaks.
The bobbin thread
breaksr
The needle breaks.
Skipped stitches
Seam puckering
The cloth is not
feeding smoothly.
The machine
doesn't work.
Cause
1 The needle thread is not threaded properly
2. The needle thread tension is too tight
3 The needle is bent or blunt.
4. The needle is incorrectly inserted
5 The needle thread and the bobbin thread are not set properly
under the presser foot at the start of sewing.
6 The threads were not drawn to the rear after the previous use.
7. The thread is too heavy or too fine for the needle
• The bobbin thread is not threaded properly in the bobbin holder
2 Lint has collected in the bobbin holder
3 The bobbin is damaged and doesn't turn smoothly.
1. The needle is incorrectly inserted
2 The needle is bent or blunt
3 The needle clamp screw is loose
4, The needle thread tension is too tight.
5. The threads were not drawn to the rear after the previous use
6 The needle is too fine for the fabric being sewn,
1 The needle is incorrectly inserted.
2 The needle is bent or blunL
3 The needle and/or threads are not suitable for the work being
sewn
4 A blue needle is not being used for sewing stretch, very fine
fabrics and synthetic&
5 The needle thread is not threaded properly
6. The wrong needle is used
1. The needle thread tension is too tight
2 The needle thread is not threaded properly
3. The needle is too heavy for the fabric being sewn_
4 The stitch length is too long for the fabric
1_ The stitches are too fine
2 The feed dog is not raised after"drop feed" sewing
3 The feed dog is packed with lint
=
i 1. The machine is not plugged in
2. A thread is caught in the shuttle race.
3 The push-clutch is disengaged
Reference
Page26
Pages28,30
Page10
Page10
Pages 28,38
Page38
Page16
Page 24
Page 92
Change the bobbin
Page10
Page10
Page10
Pages28,30
Page 38
Page16
Page10
Page10
Page16
Page!6
Page 26
Page10
Pages 28, 30
Page 26
Page16
Page34
Pages 28,30
Page 46
Page 98
Page 6
Page 94
Page 22
For customer assistance call or e-maih
1-877-SEWING-U
(1-877-739-4648)
9 am - 4:30 pro, CST, Monday - Friday
support @kenmore-sewing.com
96
Patterns are
1 The stitch is not balanced
Page 36
distorted.
Noisy operation
1• There is thread caught in the hook race.
Page 94
2 Lint has built up in the shuttle or the shuttle race.
Page 94
Publicidad
Tabla de contenido
