Stihl BGA 100 Manual De Instrucciones página 11

Ocultar thumbs Ver también para BGA 100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions
WARNING
In the event of an emergency, switch off
the motor immediately, move retaining
latch to ƒ and remove the connecting
cord.
WARNING
In order to reduce
the risk of personal
or even fatal injury
to bystanders from
blown objects
keep bystanders at
least 5 m (16 feet)
away when the
power tool is
running.
To reduce the risk of damage to
property, also maintain this distance
from such objects as vehicles or
windows.
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
Switch off the motor immediately if you
are approached.
WARNING
To reduce the risk of personal injury, do
not direct air blast towards bystanders,
since the high pressure of the air flow
can injure eyes and can blow small
objects at great speed. Do not direct
airblast towards pets.
When working in open ground and
gardens, watch out for small animals to
avoid harming them.
BGA 100
WARNING
The blower fan between the air intake
and output openings rotates whenever
the motor is running. In order to reduce
the risk of injury from contact with the
blower fan, never operate your blower
without a properly mounted blower tube
or with a damaged intake screen.
WARNING
Never insert any foreign object into the
air intake of the machine or into the
nozzle of the blower. It will damage the
blower fan and may cause serious injury
to the operator or bystanders as a result
of the object or broken parts being
thrown out at high speed.
Do not place the blower on the ground
when operating at high speed, because
small objects such as sand, grass, dust,
etc. may be pulled into the air intake and
damage the fan wheel. It is best to turn
the machine off when putting it on the
ground.
After Finishing Work
Always clean dust and dirt off the power
tool – do not use any grease solvents for
this purpose.
MAINTENANCE, REPAIR AND
STORING
If you make a warranty claim for a
component which has not been serviced
or maintained properly or if
nonapproved replacement parts were
used, STIHL may deny coverage.
WARNING
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
Strictly follow the maintenance and
repair instructions in the appropriate
section of your instruction manual.
Please also refer to the maintenance
chart in the manual.
Always switch off the
motor, move retaining
latch to ƒ and remove
the connecting cord from
the power tool before car -
rying out any repairs or
maintenance work or
cleaning the power tool.
This avoids the risk of the
motor starting
unintentionally.
WARNING
Do not attempt any maintenance or
repair work not described in your
instruction manual. Have such work
performed by your STIHL servicing
dealer only.
Tighten all nuts, bolts and screws after
each use.
Regularly check the electrical contacts
and ensure that the insulation of the
power cord and plug of the charger and
the connecting cord from the blower is in
good condition and show no sign of
aging (brittleness).
English
9

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido