Specifications - Stihl BGA 100 Manual De Instrucciones

English
Definitions
1. Nozzle
Mounted on blower tube, directs
airstream.
2. Blower Tube
Directs airstream.
3. Light Emitting Diodes (LEDs)
Indicate the state of power level.
4. Retaining Latch
Locks or unlocks the trigger switch
and selects the power level.
5. Trigger Switch
Switches the motor on and off and
controls the speed of the motor.
6. Control Handle
The handle of the blower held by the
operator´s hand.
7. Carrying Ring
Connects the blower to the harness.
8. Socket
Connects the plug of the connecting
cord to the blower.
9. Plug of Connecting Cord
Connects the connecting cord to the
socket of the blower.
10. Intake Screen
Fits over the intake opening and
reduces the risk of direct contact
with the axial fan, which is located
under the screen.
20

Specifications

Battery
Type: Lithium-ion
1)
Designation : AP, AR
2)
Rated capacity in Ah : See rating
plate
3)
Stored energy in Wh : See rating
plate
1
Connected to machine by
connecting cord
2
Rated capacity calculated pursuant
to IEC 61960. Usable energy
available to the operator will be
less.
3
The battery is marked with its
stored energy as provided by the
cell manufacturer. Usable energy
available to the operator will be
less.
The machine may be operated only with
original STIHL AP and AR rechargeable
batteries.
Power tool running time is dependent on
the stored energy of the battery.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
Charger
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
Maximum air flow rate
with nozzle 840 m
(495 cf/min)
Maximum air velocity
with nozzle: 63 m/s
(141 mph)
3
/h
BGA 100