Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE THE FIRST USE
•
Remove all packaging material.
•
Remove any stickers or labels from the appliance.
•
Wipe the inside and outside of the appliance with a moist cloth.
•
Place the appliance on a stable, horizontal and level surface, do
not place the appliance on non-heat-resistant surfaces.
•
When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
Fat collecting/baking tray
•
Always place the fat collecting tray in the lower rails of the
cooking space to collect dripping fat, food residues or crumbs. It
can also be used as a baking tray by placing food on it, place the
baking tray in the middle rails.
Rotating spit fork
•
The spit fork shaft contains two notches. The notches mark the
outermost positions of the locking screws. These must not be
attached any further to enable correct operation.
•
The rotating spit fork is suitable for grilling large pieces of meat,
but do not place pieces of meat that are too large, the spit fork
must still be able to rotate.
•
Slide one of the rotating spit forks onto the shaft and lock it with
the locking screw.
•
Now slide the items you want to grill onto the shaft.
•
Slide the other rotating spit fork onto the shaft and lock it with the
locking screw.
•
Plug the left end of the shaft as far as it will go into the round
holder on the left-hand side of the cooking space.
•
Insert the other end of the shaft into the support on the right-hand
side of the cooking space.
•
Check if it is placed correctly.
Removal tool
•
Use the removal tool to take out the rotating spit fork and the
baking racks from the cooking space.
•
Place the end of the removal tool under the shaft.
•
First lift up the right side of the shaft and move it forwards until
the left end of the shaft is released from the holder.
•
Lift the rotating spit fork and the baking racks gently out of the
cooking space and put them on a heat-resistance surface.
•
Use the removal handle to take out the rotating basket from the
cooking space by pressing the handle and secure it in the handle
holder.
•
Lift the rotating basket gently out of the cooking space and put it
on a heat-resistance surface.
Rotating basket
•
The rotating basket can be used to prepare chips or other potato
products, pieces of vegetables, meat and frozen products like
chicken nuggets or squid rings.
•
Don't overfill the basket with ingredients, if it's to full, the food will
not cook evenly.
•
Close the basket and ensure that it is shut correctly so that it
can't open during use.
Instruction manual
EN
5
Publicidad
Tabla de contenido
