Sony HT-G700 Manual De Instrucciones página 32

eARC/ARC (Enhanced Audio
Return Channel/Audio
Return Channel)
If the system is connected to a TV's
HDMI IN jack compatible with eARC or
ARC, you can listen to TV sound from the
speakers of the system without
connecting an optical digital cable.
On the system, set [HDMI] - [EARC] to
[ON] (page 36). The default setting is
[ON].
Notes
• Enable the eARC or ARC function of the
TV. For details, refer to the operating
instructions of the TV.
• If the TV is not compatible with eARC or
ARC, an optical digital cable (not
supplied) needs to be connected (refer to
the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc player, "PlayStation
connected to the system, the system
and TV are turned on automatically, the
input of the system is switched to the
HDMI input, and sound is output from
the speakers of the system.
Notes
• If [HDMI] - [STANDBY THROUGH] is set to
[ON] or [AUTO] and the TV sound was
output from the speakers of the TV the
previous time you watched the TV, the
system may not turn on and the sound
and picture may be output from the TV
even if device content is played (page 36).
• Depending on the TV, the beginning part
of content being played may not play
correctly.
32
US
HDMI Standby Through
Power Saving Setting
HDMI Standby Through is a function that
allows you to enjoy the sound and
picture of a connected device without
turning on the system.
You can reduce system standby power
consumption by setting [HDMI] -
[STANDBY THROUGH] to [AUTO]
(page 36). The default setting is [AUTO].
Note
If the picture of a device connected to the
system is not displayed on the TV, set
[HDMI] - [STANDBY THROUGH] to [ON]. If
you connect a TV other than those
manufactured by Sony, we recommend
you to select this setting.
4," etc.)
®