Storing A Number Of The Caller Id List Into The Phone Directory - Sony SPP-ID970 Manual De Instrucciones

Using the Caller ID list (continued)
Storing a number of the Caller ID list into
the Phone Directory
1
Display the name and phone number you want
to store from the Caller ID list (see page 32).
2
Confirm the number and press Jog Dial.
3
Turn Jog Dial up to make "PGM" flash and
press Jog Dial.
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see page
25).
4
Press Jog Dial.
The cursor flashes at the end of the phone
number.
Enter or change the phone number, if necessary
(see page 25).
5
Press Jog Dial again.
You will hear a long confirmation beep and the
name and number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 37.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
US
36
Caller ID Features
SMITH JOHN
1-201-123-4567
DIAL PGM ERASE
1-201-123-4567
SMITH JOH N
12011234567
SMITH JOHN
12011234567