Using A "Memory Stick" Serial Port Adaptor (For Handycams); Connections And Settings - Sony Cyber-shot DSC-F505 Manual De Instrucciones

Using a "Memory Stick" Serial Port Adaptor (for
Handycams)
With the Sony "Memory Stick" (MS) Serial Port Adaptor (for Handycams) connected
to the PC, PictureGear lets you transfer images between the PC and "Memory Stick"-s.
PNote
The "Memory Stick"-s described here refer to those in which images have been stored by the
device with which the software was bundled (or with the devices for which the accessory kit
bundle is intended). "Memory Stick"-s containing images stored by other devices are not
guaranteed to be compatible.

Connections and Settings

1
Turn off the PC power.
2
Connect one end of the connection cable to a PC serial port, and the other
end to the DIGITAL IN/OUT jack on the MS Serial Port Adaptor.
3
Plug the cord of the MS Serial Port Adaptor into an outlet to turn it on.
Refer to the MS Serial Port Adaptor operating manual for details.
4
Turn on the PC and run PictureGear.
5
In the Setup menu, point to Connection with Other Device, and click MS
Serial Port Adaptor.
The MS Serial Port Adaptor Settings dialog box appears.
88-GB