Vermeiren Albatros Manual De Instrucciones página 18

N
3.2.3 Dismantling
L
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
crushed or cut during dismantling.
L
WARNING: Risk of injury - Check the emergency stop (red pushbutton on the
control box) is activated, to avoid unintentional adjustment movements.
7. Attach the footplate with the hooks to the chassis of
the patient hoist.
8. Attach the leg support by the locking pin. Position
the leg support to the desired height and depth.
1. Secure the two casters at the back of the chassis by
pressing the caster brake plates down gently to their
end stops with the tip of your foot. To release the
brake, push the brake plate gently back up again with
the front of your foot until the casters are free.
2. Remove the leg support by the locking pin.
3. Remove the footplate from the chassis of the patient
hoist.
Page 16
Albatros
2010-12