Use Of The Jumbo System (Battery, Control Box + Included Battery Charger) - Vermeiren Albatros Manual De Instrucciones

N
2.2 Use of the JUMBO system (battery, control box + included
battery charger)
JUMBO is a modular system combining an actuator, a control box and a battery in a flexible
solution, specially developed for patient hoists.
2.2.1 Battery
2.2.2 Control box + included battery charger
2.2.3 External charger (OPTIONAL)
The battery is above the control box and is replaceable with an
integrated clip system.
Primary voltage
Ambient temperature
Ambient storage temperature
Relative storage humidity
Conformity
The control box is designed with a red
emergency stop and an internal battery charger.
Primary voltage
Secondary voltage
(charging voltage)
Secondary current
(charging current)
Safeguards
Ambient temperature +5°C to +40°C (41°F to
Ambient storage
temperature
Relative storage
humidity
Conformity
The external charger shall be mounted on the
wall. It is possible to charge the spare battery
(optional) with this external charger and you
have no waiting time to use the patient hoist
when charging the batteries.
Primary voltage
Charging current
Ambient temperature +5°C to +40°C (41°F to
Ambient storage
temperature
Relative storage
humidity
Page 8
24 VDC
+5°C to +40°C (41°F to 104°F)
-10° to +50°C (14°F to 122°F)
max. 90% (non-condensing)
tested in accordance with IEC 60601-1
100 - 240 VAC / 50/60 Hz
24 VDC, max. 250 VA
max. 10 A
Protected against reverse
polarisation, electrical surges
and extreme temperature
104°F)
-10° to +50°C (14°F to
122°F)
max. 90% (non-condensing)
tested in accordance with
IEC 60601-1
We reserve the right to introduce technical changes.
100 - 240 VAC / 50/60 Hz
max. 650 mA
104°F)
-10° to +50°C (14°F to
122°F)
max. 90% (non-condensing)
Albatros
2010-12