Attaching/Removing The Lens - Sony NEX-3N Manual De Instrucciones

Attaching/removing the lens

Set the power switch of the camera to OFF before you attach or remove the
lens.
1
If the cap or the packaging lid
is attached, remove it from the
camera or the lens.
• Quickly change the lens somewhere
away from dusty locations so as to
prevent dust or debris from entering
the camera.
2
Mount the lens by aligning the
white index marks on the lens
and the camera.
• Hold the camera's face downward
to prevent the dust from entering
into the camera.
3
While pushing the lens lightly
toward the camera, turn the
lens clockwise until it clicks
into the locked position.
• Be sure to put the lens on straight.
Notes
• When attaching a lens, do not press the lens release button.
• Do not use excessive force when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). For details, refer to the operating manual supplied with the Mount
Adaptor.
• When using a lens equipped with a tripod socket, attach the socket on the lens side
to the tripod to maintain balance.
GB
16