Storage Drawer; Warming Drawer - Maytag MER5570BCQ Guia Del Usuario

CARE & CLEANING,

STORAGE DRAWER

(Select Models)
CAUTION:
Do not store plastic, paper
products, food or flammable
materials in this drawer. The
drawer may become too warm
for these items when the oven
is in use.
The storage drawer can be removed to
allow you to clean under the range.
TO REMOVE:
1. Empty drawer and pull out to the
first stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
4. Grasp sides and lift drawer top up
and out.
TO REPLACE:
1. Fit the ends of the drawer glides
into the rails in the range.
2. Lift up the front of the drawer and
gently push in to the first stop posi-
tion.
3. Lift drawer up again and push until
drawer is closed.
17
cont.

WARMING DRAWER

(Select Models)
CAUTION:
Do not store plastic, paper
products or flammable materi-
als in the warming drawer. The
drawer may become too warm
for these items when the oven
above is in use or the warming
drawer is pre-heated.
To avoid contact with the warm-
ing drawer heating element, pull
drawer all the way out to add or
remove food.
Never use oven cleaners to
clean the warming drawer.
TO REMOVE WARMING DRAWING:
1. Empty drawer and pull out to its full
open position.
2. Locate the black triangle lever on
each side of the drawer.
3. Press the lever down on the right
side and lift the lever up on the left
side at the same time. Then pull
drawer out another inch.
4. Carefully pull the drawer all the way
out holding on to the sides, not the
drawer front.
TO REPLACE WARMING DRAWER:
1. Pull the bearing glides to the front of
the chassis glide.
2. Align the glide on each side of the
drawer with the glide slots on the
range.
3. Push the drawer into the range until
levers "click" (approximately 2").
Pull the drawer open again to seat
bearing guides into position. If you
do not hear the levers "click" or the
bearing guides do not feel seated,
remove the drawer and repeat
steps 1 through 3. This will mini-
mize possible damage to the bear-
ing glides.