Starting / Stopping The Engine - Stihl TS 480i Manual De Instrucciones

English
Open the fuel filler cap
1.
2.
Press the cap down with your hand as
far as possible, turn it counterclockwise
(approx. 1/8 turn) and remove it.
Close the fuel filler cap
1.
2.
Fit the cap and turn it until it
N
engages in the bayonet mount.
Press the cap down with your hand
N
and turn it clockwise
(approx. 1/8 turn) until it engages
completely. Check cap for
tightness.
Change the fuel pickup body every year
The fuel pickup body is equipped with a
magnetic separator.
30
Drain the fuel tank.
N
Pull the fuel pickup body out of the
N
tank with a hook and disconnect it
from the hose.
Connect a new fuel pickup body to
N
the hose.
Return the fuel pickup body to the
N
tank.
Starting / Stopping the
Engine
3
3
1
2
Press throttle trigger lockout (1) and
N
then throttle trigger (2)
Hold both lockout and trigger down
N
simultaneously
Move the stop switch (3) to F
N
Release the throttle trigger, stop
N
switch and throttle trigger lockout in
succession – starting throttle
position
TS 480i, TS 500i