Canon EOS Rebel T7 Manual De Instrucciones Básicas página 133

Wireless Connection Status
Wireless connection status can be checked with the camera's <k>
lamp.
<k> lamp
Cable Connection Cautions
When [53: Wi-Fi/NFC] is set to [Enable], connection via interface cable

or HDMI cable is disabled. Set [53: Wi-Fi/NFC] to [Disable] before
connecting a cable.
When the camera is connected to Connect Station, a computer, printer,

GPS receiver, TV set, or any other device via a cable, settings for [Wi-Fi/
NFC] cannot be changed. Disconnect the cable before changing any
settings.
Cards
If there is no card in the camera, it cannot be connected wirelessly.

Additionally, for [l] and [m], the camera cannot be connected
wirelessly if there are no images saved on the card.
Using an Eye-Fi Card
When [53: Wi-Fi/NFC] is set to [Enable], image transfer using an Eye-Fi

card is disabled.
Connection Status
Connected
Data is being sent or
received
Waiting for connection/
Waiting for reconnection
Connection error
Basic Operation and Settings
<k> Lamp
Blinking rapidly
Blinking
Blinking
somewhat
rapidly
On
W-13