Using The Tuner; Connect The Fm Antenna; Listening To The Fm Radio; Memorizing Stations - Pioneer XW-NAV1-K Manual De Instrucciones

07

Using the tuner

Chapter 7:
Using the tuner
• This unit can not transfer FM radio from the
HDMI OUT terminal.

Connect the FM antenna

Connect the FM antenna plug onto the center
pin of the FM antenna socket.
not transfer FM radio from the HDMI OUT
terminal.

Listening to the FM radio

The tuner can receive FM broadcasts, and lets
you memorize your favorite stations so you
don't have to manually tune in every time you
want to listen.
1 Press FUNCTION to switch to the tuner.
The tuned frequency will be displayed on the
front panel display (e.g., '
2 Tune to a station.
When the tuner receives FM broadcasts, the
TUNE indicator lights.
There are two ways to do this:
Automatic tuning - To search for stations,
press and hold TUNE +/– for about a few
second. This unit will start searching for
the next station, stopping when it has
found one. Repeat to search for other
stations.
Manual tuning - To change the frequency
one step at a time, press TUNE +/–.

Memorizing stations

You can save up to 9 station presets so that you
always have easy access to your favorite
stations without having to tune in manually
2
each time.
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will
be overwritten with the new one.
22
En
•
1
The tuned frequency will be displayed on the
front panel display.
2
1
This unit can
3
seconds.
The tuned frequency is preset to the selected
number button. The previous station preset is
overwritten.
•
1
The tuned frequencies will be preset to the
buttons in numerical order.
Auto tuning stops automatically after the FM
band is finished, or after the limit of 9 presets
has been reached.
').

Listening to station presets

1
The tuned frequency will be displayed on the
front panel display.
2
memorized the FM radio station.
Manually saving station presets
Press FUNCTION to switch to the tuner.
Tune to an FM radio station.
Press number button (1 to 9) for three
Automatically saving station presets
Press ST + for three seconds.
Press FUNCTION to switch to the tuner.
Press number button (1 to 9) that is
Tip
• Press ST + repeatedly to selected the
station preset in numerical order.