Using The Timer; Setting The Clock; Setting The Wake-Up Timer - Pioneer XW-NAV1-K Manual De Instrucciones

Using the timer

Chapter 11:
Using the timer

Setting the clock

Setting the clock allows you to use the timer.
• Default setting:
1 With the power turned ON, press
TIMER/CLOCK.
The current time is displayed on the front panel
display.
2 Press TIMER/CLOCK again.
' ' is displayed on the front panel
display.
3 Press ENTER.
The hour blinks on the front panel display.
• When the clock is not set, '
displayed on the front panel display.
Use / to set the hour, then press
4
ENTER.
The minute blinks on the front panel display.
Use / to set the minute, then press
5
ENTER.
The newly set value displays for 5 seconds, and
then the setting is completed.
Note
1 You'll need to set the clock again if you unplug the unit (or in case of a power failure).

Setting the wake-up timer

1
1 With the power turned ON, press
TIMER/CLOCK.
The current time is displayed on the front panel
display.
2 Press
'
display.
3 Press ENTER.
The hour blinks on the front panel display.
• When the wake-up timer is not set,
'
display.
' is
Use / to set the hour, then press
4
ENTER.
The minute blinks on the front panel display.
Use / to set the minute, then press
5
ENTER.
TIMER/CLOCK twice.
' is displayed on the front panel
' is displayed on the front panel
11
29
En