Iris Lock; Backlight Compensation; Spot Exposure Control - JVC GR-D850U Manual De Instrucciones

36
Features For Recording
EN

Iris Lock

Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light. Use this
function in the following situations:
• When shooting a moving subject.
• When the distance to the subject changes
(so its size in the LCD monitor changes),
such as when the subject is backing away.
• When shooting on a refl ective natural
background such as at the beach or when
skiing.
• When shooting objects under a spotlight.
• When zooming.
1 1
1
Perform steps –
( 35).
2 2
Adjust zoom so that the subject fi lls the
LCD monitor, then press and hold SET
for over 2 seconds. The " " indication
appears.
3
Press SET. The iris is locked.
4 4
Press MENU.

Backlight Compensation

Backlight compensation feature brightens
the dark subject portion by increasing the
exposure.
1
Set the Power Switch to "REC" (
2
Set the recording mode to "M" (
3 3
Press - so that the Backlight
Compensation indicator " - " appears.
To cancel Backlight Compensation
Press - twice so that the " - " indicator
disappears.
5 5
in "Exposure Control"
SET
13).
20).
Note:
Using Backlight Compensation may cause the
light around the subject to become too bright and
the subject to become white.

Spot Exposure Control

Selection of a spot metering area enables more
precise exposure compensation.
1
Set the Power Switch to "REC" (
2
Set the recording mode to "M" (
3 3
Press - twice so that the Spot Exposure
Control indicator " . " appears.
• A spot metering area frame appears at the
center of the LCD monitor.
4 4
Press SET.
• Spot Exposure Control is engaged.
• Exposure is adjusted to make the
brightness of the selected area most
appropriate.
To cancel Spot Exposure Control
Press - once so that the " . " indicator
disappears.
To lock the iris
3 3
After step , press and hold SET over 2
seconds. The " " indication appears and the
iris is locked.
Notes:
• Depending on the shooting location and
condition, optimum result may not be attained.
• "STROBE" in "EFFECT" cannot be used with
Spot Exposure Control.
13).
20).