The settings below are effective only for video playback except "REC MODE" and "SNAP/SLOW".
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made,
and plays the sound back. Select the sound to accompany your playback picture.
Menus
SOUND L/R
NARRATION
SNAP/SLOW
REC MODE
[T]Z[M] COPY
Each setting (except "OFF" in "ON SCREEN", "DATE/TIME" and "TIME CODE") is linked with
"DISPLAY", which appears when the Power Switch is set to "REC".
The parameters (except "OFF" in "ON SCREEN" setting) are the same as in the description on
31.
Menus
ON SCREEN
DATE/TIME
TIME CODE
WIDE TV
LCD BRIGHT
SETTING
Each setting (except "DEMO MODE") is linked with "SETTING", which appears when the Power
Switch is set to "REC".
The parameters are the same as in the description on
Menus For Detailed Adjustment
Playback Menus
Settings: [ ] = Factory-preset
[STEREO
]: Sound is output on both "L" and "R" channels in stereo.
SOUND L
: Sound from the "L" channel is output.
SOUND R
: Sound from the "R" channel is output.
Although it is not possible to perform audio dubbing with
this camcorder, you can hear sound from an audio-dubbed tape
during playback using this function.
[OFF]: Original sound is output on both "L" and "R" channels in
stereo.
ON:
Dubbed sound is output on both "L" and "R" channels in
stereo.
MIX:
Original and dubbed sounds are combined and output in
stereo on both "L" and "R" channels.
30, "SNAP/SLOW".
30, "REC MODE".
[OFF]: When the SNAPSHOT button is pressed during tape
playback, the playback image pauses and normal playback
will resume after approximately 6 seconds. (The still image is
not recorded.)
ON:
Enables dubbing of images recorded on a tape to a memory
card.
Settings: [ ] = Factory-preset
OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
[OFF] / AUTO / ON
[OFF] / ON
20, "Time Code"
[ON] 16:9/ OFF 4:3
31, "WIDE TV"
18, "Brightness Adjustment Of The Display"
32.
33
EN