Functional Description - Milwaukee 3000 Manual Del Operador

Soporte de taladro de núcleo compacto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
CORE DRILL STAND
•Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fasteners may contact hidden wiring.
Cutting accessory or fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
•Always secure the stand to the work surface to help
prevent personal injury and to protect the stand.
Do not rely on the weight of the stand, shoring pin
alone or body weight on the stand for securing
during use. An unsecured stand could rotate during
coring and possibly cause injury. NEVER attempt to
use body weight to hold stand. Never rely on the shor-
ing pin alone for securing.
•When securing the drill stand with anchors and
fasteners to the workpiece, ensure that the anchor-
ing used is capable of holding and restraining the
machine during use. If the workpiece is weak or
porous, the anchor may pull out causing the drill stand
to release from the workpiece.
•When securing the drill stand using the vacuum
gaskets on the workpiece with a vacuum pump,
install the stand on a smooth, clean, non-porous
surface. Do not secure to laminated surfaces such
as tiles and composite coating. If the workpiece is
not smooth, flat or well affixed, the pad may pull away
from the workpiece.
•Ensure there is sufficient vacuum before and dur-
ing drilling. If the vacuum is insufficient, the pad may
release from the workpiece.
•Never perform drilling with the machine secured by the
vacuum pad only, except when drilling downwards. If
the vacuum is lost, the pad will release from the workpiece.
•When drilling through walls or ceilings, protect
persons and the work area on the other side. The
bit may extend through the hole or the core may fall
out on the other side.
•To reduce the risk of injury, always wear proper
eye protection marked to comply with ANSI Z87.1.
•Wear ear protectors when diamond drilling. Exposure
to noise can cause hearing loss.
To reduce the risk of injury in ap-
WARNING
plications that produce a consider-
able amount of dust, use an OSHA compliant dust
extraction solution in accordance with the solu-
tion's operating instructions.
•Follow all instructions and warnings provided with
the core drill and accessories. Only use a core drill
and accessories specifically recommended for this tool.
Others may be hazardous.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.

FUNCTIONAL DESCRIPTION

1
21
20
19
18
17
16
15
1. Shoring pin
2. Mast
3. Angle gauge (on back)
4. Depth gauge
5. Carrier assembly
6. Feed handle location
7. Carrier wheels (4)
8. Angle brace with
handle
9. Bubble level (on back)
10. MX FUEL™ battery
storage
3
2
3
4
5
6
7
8
9
10
12
13
14
11. Vacuum gauge
12. Gaskets
13. Vacuum release pin
14. 360° Level
15. Center pointer
16. Eye bolts (4)
17. Vacuum coupler
18. Rack
19. Mount plate with
handle
20. Feed handle
21. Feed handle button
11

Publicidad

Tabla de contenido
loading

Tabla de contenido