Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1600A012FS_7300 2/1/17 10:17 AM Page 13
Cordless Rotary Tool and run the 415 Dressing Stone
(not included, available as accessory) lightly against
the revolving wheel point. This removes high spots and
trues up the wheel point for good balance.
Remember, your new Dremel Cordless Rotary Tool is
the finest power tool of its kind. But its performance
Introduction
The Cordless Rotary Tool is a handful of high-speed
power. It serves as a carver, a grinder, polisher, sander,
cutter, power brush, drill and more.
Your Cordless Rotary Tool has a small, powerful elec tric
motor, is comfort able in the hand, and is made to accept
a large variety of accessories including abrasive wheels,
drill bits, wire brushes, polishers, engraving cutters,
and cutting wheels. Accessories come in a variety of
shapes and permit you to do a num ber of different jobs.
As you be come familiar with the range of accessories
and their uses, you will learn just how versatile your
Cordless Rotary Tool is. You'll see dozens of uses you
hadn't thought of before now.
The real secret of the Cordless Rotary Tool is its speed.
To understand the advantages of its high speed, you
have to know that the standard portable electric drill
runs at speeds up to 2,800 revolutions per minute. The
typical electric drill is a low-speed, high torque tool; the
Cordless Rotary Tool is just the opposite — a high-
speed, low torque tool. The chief difference to the user
is that in the high speed tools, the speed combined with
the acces sory mounted in the collet does the work. You
don't apply pressure to the tool, but simply hold and
guide it. In the low speed tools, you not only guide the
tool, but also apply pres sure to it, as you do, for example,
when drilling a hole.
It is this high speed, along with its compact size and
wide variety of special accessories, that makes your
Cordless Rotary Tool differ ent from other power tools.
The speed enables it to do jobs low speed tools cannot
do, such as en graving glass, etc.
Getting the most out of your Cordless Rotary Tool is a
matter of learning how to let this speed work for you.
is only as good as the accessories with which it is
used. We recommend only Dremel accessories be
used. Use of any other accessories may create a haz-
ard. We hope you'll enjoy many years of trouble free
pleasure from your Dremel Cordless Rotary Tool.
Operation Instructions
Releasing and inserting battery Pack
Remove the battery pack from the tool by squeezing
the two tabs on the battery pack together and slide the
battery pack out of the tool.
The Model 7300 Cordless Rotary Tool battery pack is
not fully charged. The tool is equipped with a removable
battery pack. Be sure to charge pack prior to initial use.
For best re sults on first charge, charge pack overnight.
1. Put the switch in the "OFF" position.
2. Squeeze release tabs on both sides of battery pack,
and remove pack from back of tool.
3. Align exterior shape of battery pack with exterior
shape of charger, squeeze release tabs, insert battery
pack into charger as shown and release pressure on
tabs so it locks in place.
4. Plug charger into the power source. The green L.E.D.
light indicates connection has been made and the
battery pack is charging. The L.E.D. light will blink while
13
GUIDE TRACK
BATTERY PACK
RELEASE TAB
Charging the tool
To charge the tool:
Publicidad
Tabla de contenido
