Connecting The Projector - Sony VPL-MX20 Manual De Referencia

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
Refer also to the instruction manual of the equipment to be connected.
To connect a computer or a USB memory (VPL-MX25 only)
a Plug the AC power cord into a wall outlet.
b Connect the projector to a computer. (When connecting a computer)
Connect the USB memory to this unit. (When connecting a USB memory/
VPL-MX25 only)
to (USB)
to AC IN socket
2
2
USB memory
to a wall outlet
AC power cord (supplied)
Refer to "Operating Instructions (For Network/ USB File Viewer)" on the supplied CD-
ROM for wireless connection with the computer.
2
2
1
1
Computer
to monitor output
to INPUT A connector
HD D-sub 15 pin cable
(supplied)
5
GB
Projecting