General Instructions - baltur SPARK 18 W Manual De Instrucciones

INSTRUCTIONS FOR USE IN SAFE
CONDITIONS
PURPOSE OF THE MANUAL
The manual purpose is to contribute to the safe use of the
product, indicating the conduct and behaviour required to
prevent alterations to the safety features of the apparatus
which could derive from incorrect installation or incorrect,
unauthorised or unreasonable uses.
The manufacturer is not liable contractually or extra contrac-
tually for any damage caused by errors in installation and in
use, or where there has been any failure to follow the manu-
facturer's instructions.
• The instruction booklet is an integral and essential part of
the product and must be given to the user.
• The user must keep the booklet with care for any future
consultation.
• Carefully read the "Instruction for use" in this manual and
the instructions indicated on the product before using the
equipment in order to minimise risks and avoid accidents.
• Follow the SAFETY INSTRUCTIONS carefully. Avoid IM-
PROPER USES.
• The installer must assess RESIDUAL RISKS that might re-
main.
• Symbols are used to draw your attention to some parts of
the text or to indicate some important precautions. Their
meaning is described below.
DANGER / CAUTION
This symbol indicates a serious danger, that if ignored,
can seriously put at risk the health and safety of the
operator.
CAUTION / WARNING
This symbol indicates that a proper conduct must be
adopted in order not to put at risk the health and safety
of people and cause economic damage.
IMPORTANT
This symbol indicates particularly important technical
and operational information.

GENERAL INSTRUCTIONS

• This appliance should only be used for the purpose it has
been designed for. Any other use is to be considered im-
proper and therefore dangerous.
• The equipment must be installed in accordance with cur-
rent regulations, following the manufacturer's instructions
and by qualified technicians.
• The term 'qualified personnel' refers to personnel specifi-
cally trained and with proven skills in the field of heating
according to the local legislation in force.
• An incorrect installation can cause injury or damage to
persons, animals and objects, for which the manufacturer
cannot be held responsible.
• After removing all the packaging make sure the con-
tents are complete and intact. If in doubt do not use the
equipment and return it to the supplier. The packing is po-
tentially dangerous and must be kept away from children.
• Dispose of the packaging according to the regulations in
force in the country of use.
• Before carrying out any cleaning or maintenance, discon-
nect the equipment at the mains supply, using the system's
switch and/or shut-off systems.
• If the equipment is sold or transferred to another owner or
if the owner moves and leaves the equipment, make sure
that the booklet always goes with the equipment so it can
be consulted by the new owner and/or installer.
• With the equipment operating do not touch the hot parts
usually located near the flame or the fuel pre-heating sy-
stem, if present. These parts can remain hot even after a
non prolonged stop of the equipment.
• For all equipment with optionals or kits (including electri-
cal ones), only original accessories must be used.
• If there is any fault and/or if the equipment is not working
properly, de-activate the equipment and do not attempt to
repair it or tamper with it directly. Contact only qualified
personnel.
• Any product repairs must only be carried out by BALTUR
authorised assistance centres or its local retailer using
only original spare parts.
• Baltur and/or its local retailer decline any liability for injuri-
es or damage caused by unauthorised modifications of the
product or non-observance of the instructions contained
in the manual.
19 / 56
0006080405_201612