Network Connection - Sony HT-RT5 Manual De Instrucciones

Ocultar thumbs Ver también para HT-RT5:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting cannot be done.
 The pairing registration information
has been erased. Perform the pairing
operation again (page 12).
Pairing cannot be achieved.
 Bring this system and the
BLUETOOTH device closer together.
 Make sure this system is not receiving
interference from a wireless LAN
device, other 2.4 GHz wireless devices,
or a microwave oven. If a device that
generates electromagnetic radiation
is nearby, move the device away from
this system.
You cannot use the NFC function.
 The NFC function does not work with
BLUETOOTH-compatible receivers
(such as headphones). To listen to
sound using a BLUETOOTH-
compatible receiver, see "Listening to
Sound by Transmitting to a
BLUETOOTH-compatible Receiver"
(page 14).
No sound is output from the connected
BLUETOOTH device.
 Make sure that the indicator (blue) of
the Bar Speaker is lit (page 12).
 Bring this system and the
BLUETOOTH device closer together.
 If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from this system.
 Remove any obstacle between this
system and the BLUETOOTH device or
move this system away from the
obstacle.
 Reposition the connected
BLUETOOTH device.
 Switch the wireless LAN frequency of
any nearby Wi-Fi router or PC to
5 GHz range.
 Increase the volume on the
connected BLUETOOTH device.

Network connection

The system cannot connect to the
network.
 Check the network connection
(page 16) and the network settings
(page 29).
Wireless LAN connection
You cannot connect your PC to the
Internet after [Wi-Fi Protected Setup
(WPS)] is performed.
 The wireless settings of the router
may change automatically if you use
the Wi-Fi Protected Setup function
before adjusting the settings of the
router. In this case, change the
wireless settings of your PC
accordingly.
The system cannot connect to the
network or the network connection is
unstable.
 Make sure the wireless LAN router is
on.
 Check the network connection
(page 16) and the network settings
(page 29).
 Depending on the usage
environment (including the wall
material), radio wave reception
conditions, or obstacles between the
system and the wireless LAN router,
the possible communication distance
may be shortened. Move the system
and the wireless LAN router closer to
each other.
 Devices that use a 2.4 GHz frequency
band, such as a microwave,
BLUETOOTH, or digital cordless
device, may interrupt
communication. Move the system
away from such devices, or turn off
such devices.
51
US

Publicidad

Tabla de contenido
loading

Tabla de contenido