Listening To Music Through A Bluetooth Connection; Pairing The System With A Bluetooth Device And Listening To Music - Sony CMT-SBT40D Manual De Instrucciones

Ocultar thumbs Ver también para CMT-SBT40D:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Listening to music through a
BLUETOOTH connection
Pairing the system
with a BLUETOOTH
device and listening
to music
You can listen to music from BLUETOOTH
device over a wireless connection.
Before using the BLUETOOTH function,
perform pairing to register your BLUETOOTH
device.
Note
 Place the BLUETOOTH device to be connected
within one meter of the system.
 If your BLUETOOTH device is compliant with
touch (NFC), skip the next procedure. See
"Listening to music by one-touch action (NFC)"
(page 23).
1
Press BLUETOOTH MENU .
If the BLUETOOTH function is selected
when the system has no pairing
information, the system enters the
pairing mode automatically.
You can also perform pairing by using a
button on the unit. See "To perform the
pairing by using a button on the unit"
(page 21).
2
Press /  to select "PAIRING,"
.
then press
The system enters pairing mode.
"PAIRING" appears on the display
window  and the
LED  blinks quickly.
3
Search for this system with the
BLUETOOTH device.
A list of the devices found may appear
on the BLUETOOTH device display.
4
5
6
To perform the pairing by using a
button on the unit
1 Press FUNCTION  repeatedly to select "BT
2 Press and hold FUNCTION  until the
To establish a BLUETOOTH connection,
perform the same procedures after step 2
(BLUETOOTH)
using a remote.
 You can perform a pairing operation with
Select [SONY:CMT-SBT40D] (this
system).
If prompted to enter a passkey on the
BLUETOOTH device, enter "0000."
If this system is not shown in the
display window of the device, proceed
from step 1 again.
When pairing is completed, the
BLUETOOTH connection is established
automatically. "BT AUDIO" appears on
the display window  of the system
(BLUETOOTH) LED  lights
and the
up.
Perform this step within 5 minutes, or
the pairing is canceled. If the pairing is
canceled, proceed from step 1 again.
Press  .
Starts playback.
Depending on the BLUETOOTH device,
press   again. Also, you may have
to start up a music player on the
BLUETOOTH device.
Press VOLUME +/–  to adjust
the volume.
If the volume cannot be changed on
the system, adjust it on your
BLUETOOTH device.
AUDIO."
(BLUETOOTH) LED  starts to blink fast.
The system enters pairing mode. "PAIRING"
appears on the display window .
Tip
another BLUETOOTH device while the
BLUETOOTH connection is established with one
BLUETOOTH device.
21
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido