Fuel Safety; To Prevent A Kickback - Husqvarna K 770 Vac Manual Del Usuario

2. Cut section "I" of the pipe.
III
3. Ensure that the cut opens to avoid pinching.
4. Move to side II and cut from section I to bottom of
the pipe.
5. Move to side III and cut the remaining part of the
pipe ending at the bottom.

To prevent a kickback

WARNING: Avoid situations where there is
a risk of kickback. Take care when using
your power cutter and make sure that the
blade is never pinched in the kickback zone.
WARNING: Be careful when you put the
blade in an existing cut.
WARNING: Make sure that the work piece
cannot move during a cutting operation.
WARNING: Only you and proper working
technique can eliminate kickback and its
dangers.
12
I
II
• Always support the work of piece so that the cut can
keep open when cutting through. When the cut is
open there is no kickback. If the cut is closed and
pinches the blade, there is a risk of kickback.

Fuel safety

WARNING: Read the warning instructions
that follow before you use the product.
• Make sure there is plenty of ventilation when
refueling or mixing fuel (petrol and two-stroke oil).
• Take care when handling fuel. Fuel and fuel vapour
are highly flammable. Be aware of the risks of fire,
explosion and those associated with inhalation.
• Do not smoke and do not place any hot objects in
the vicinity of fuel.
• Always stop the engine and let it cool for a few
minutes before refuelling.
• When refuelling, open the fuel cap slowly so that any
excess pressure is released gently.
• Tighten the fuel cap carefully after refuelling. If the
cap is not properly tightened, the cap might vibrate
lose and fuel may escape from the fuel tank creating
a fire hazard.
• Never refuel the machine while the engine is
running.
• Always move the product at least 3 m (10 ft) away
from the refuelling area and source before starting.
After refuelling, there are some situations where you
must never start the product:
• If you have spilled fuel on the product. Wipe off the
spillage and allow remaining fuel to evaporate.
• If you have spilled fuel on yourself or on your
clothes. Change your clothes and wash any part of
your body that has come in contact with fuel. Use
soap and water.
• If the product leaks fuel. Regularly do a check for
leaks from the fuel cap and fuel lines.
Min
705 - 002 - 12.11.2018