External Dust Extractor Connection; To Sharpen The Cutting Blade; Operation - Husqvarna K 770 Vac Manual Del Usuario

3. Lock the pulley.
4. Tighten the bolt to 30 Nm (18.5 ft-Ibs).
Introduction
WARNING: Before you operate the product,
carefully read and understand the safety
chapter and the operation instructions.

External dust extractor connection

Do not use the product without an external dust
extractor. For appropriate dust extractor specification,
Technical data on page 30
refer to
16

To sharpen the cutting blade

Note: For the best cutting results, use a sharp cutting
blade.
• To sharpen the cutting blade, cut into soft material,
such as sandstone or brick.

Operation

1. Connect the dust extractor attachment on the power
cutter.
2. For specifics related to the dust extractor, refer to
operator´s manual of the dust extractor.
705 - 002 - 12.11.2018