Transport
The machine can be taken apart in to two components to
give a smaller size when transporting.
•
Disconnect the motor cable from the electrical box.
Standing beside the grinder, squeeze the handle on the
central hinge while simultaneously angling the upper
frame to the inclined transport position.
•
Loosen the nuts a few turns to release any pressure.
•
Pull out the locking pins and remove the bolts on each
side of the grinding head.
•
Remove the wheel chassis from the grinding head.
16 – English
OPERATING
1
3
2
•
Standing beside the wheel chassis, squeeze the
handle on the central hinge while simultaneously
angling the upper frame forward to the lifting position.
•
Loosen the locking knobs on the support foot.
•
Hold the handlebar to stabilize the frame and lift out
and up the support foot.
•
Holding the handlebar with one hand, again squeeze
the handle for the central hinge while lowering the
upper frame into the folded position.