Offset; Warning Indication; Maneuvering - Husqvarna PG820 RC Manual De Instrucciones

OFFSET

Used to compensate for the machine displacement when
maneuvering forward when grinding. Press the arrow
keys to correct.
NOTICE! There is a delay before this correction comes
into play.
• Arrow up/down
OFFSET 2

Warning indication

The warning triangle comes on and the machine's
warning lamp flashes faster when the machine detects a
fault. For more information regarding the fault that has
been detected and what action to take, see the
'Troubleshooting' section
REV FWD
0
SPEED
0
POWER
0
OFFSET 0
OPERATING
OFFSET 2
OK
Jan 05 12:45
REV FWD
0
SPEED
0
POWER
OK

Maneuvering

General
The machine can be maneuvered both manually and with
a remote control.
Moving with support wheel
CAUTION! The support wheel should
!
only be used for moving short distances
within the work area and from a transport
vehicle to the workplace.
OK
For more information, please see the 'Support wheel'
section.
• Lower the support wheel to raise the grinding unit
from the work area. Move the machine manually or
with the remote control.
–
English 23