Installation; Receiving And Handling - ESAB MobileFeed 301 AVS Instrucciones De Uso

4 INSTALLATION

Height × Width × Length
Weight (with contactor, without spool) 33 lbs (15 kg)
Enclosure class
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP 23S is intended for indoor and outdoor use; however, should not be
operated in precipitation.
4 INSTALLATION
4.1

Receiving and handling

Before installing this equipment, clean all packing material from around the unit and carefully
inspect for any damage that may have occurred during shipment. Any claims for loss or
damage that may have occurred in transit must be filed by the purchaser with the carrier. A
copy of the bill of lading and freight bill will be furnished by the carrier on request if occasion
to file claim arises.
WARNING!
Secure the equipment -
particularly if the ground is
uneven or sloping.
If the unit is unstable in upright position (A), as when the torch or spool is disconnected or
when there is a risk that the unit might be pulled by the torch during operation, the unit must
be secured. Alternatively it can be operated in horizontal position (B) if conditions permit.
0558 012 633
MobileFeed 301 AVS
17.0" × 8.3" × 21.0" (432 × 210 × 534 mm)
IP23S
- 11 - © ESAB AB 2015