Epson SureLab D3000 Manual De Usuario página 3

PRINTHEAD MAINTENANCE KIT
You can use this kit to remove dirt from the print head unit and print head wiper. This
helps to restore print quality if it has declined, as well as prevents a decline in print
quality. Use this kit in the following situations.
• If there are streaks or ink deposits in the printouts, in the margins, or beyond the
print area
• If you want to prevent the above mentioned streaks or ink deposits from appearing
in the printouts
Each one of the following items is required for cleaning. If any of the items are left
unused, put them in the box of the kit, and keep it safe.
Head cleaning mat (x1)
For cleaning the bottom and sides of the print head unit.
Cleaning stick (x1)
For cleaning the print head wiper.
BEMCOT cloth (x1)
For wiping off any deposits on the cleaning stick.
- PRINTHEADDMAINTENANCEDKIT
3
-
EN