Cleaning The Print Head Unit - Epson SureLab D3000 Manual De Usuario

Cleaning the Print Head Unit

StartDMaintenanceDUtilityDandDchangeDtheDmodeDtoDtheDAdministrator
A
sD mode.D SelectD
-D
Maintenance]
The fan starts operating for approximately 30 seconds to cool down inside the printer.
Note:
Do not open the top cover until inside the printer has cooled down and "Open the top
cover. " is displayed in the status area in the following screen.
OpenDtheDtopDcover.
B
D
D
Caution:
Do not touch the heater unit immediately after printing. Because the heater remains hot,
you could be burned.
- PRINTHEADDMAINTENANCEDKIT
[Settings/Maintenance]
[Head Maintenance]
5
-
-D
[CR Unit Adjustment/
,DandDthenDclickD
[1. Start]
'
.
EN