Epson SureLab D3000 Manual De Usuario página 4

Note:
• To use this device, SL-D3000 System Application Ver.2 or higher needs to be installed on
the Client PC.
N "SL-D3000 Administrator's Guide" - "Checking the System Application Version"
N "SL-D3000 Administrator's Guide" - "Changing the System Application Version"
• Perform the following steps when using this kit. After starting operations, make sure you
perform these steps from start to finish without stopping. It takes approximately 50
minutes to complete these steps.
• Perform print head maintenance with a new kit. If you have to stop print head
maintenance for some reason, do not reuse the kit. The print head could be damaged if
you perform cleaning with a used kit.
Tip:
We recommend cleaning the printer regularly with this kit . Use the period between using
this printer for the first time and cleaning for the first time as your standard to determine
how often you need to perform cleaning.
- PRINTHEADDMAINTENANCEDKIT
4
-