RIDGID R4210 Manual Del Operador página 22

ASSEMBLY
 Rotate the miter table until the blade is parallel with the
framing square.
 Push the miter lock lever down to lock the miter table.
 Tighten the 4 visible screws that secure the miter scale/
detent plate.
 Lift the miter lock lever to unlock the miter table.
DETENT
ENGAGED
BEVEL
DETENT
LEVER
TIGHTEN
SLIDING
MITER
FENCE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
HANDLE
DETENT BEVEL
DISENGAGED LOCK
KNOB
LOOSEN
MITER
FRAMING
TABLE
SQUARE
 Press the miter detent bypass button. Rotate the miter
table until the pointer is at the left 15° position on the
miter scale.
 Tighten the remaining screw to secure the miter scale/
detent plate.
SLIDING
MITER
FENCE
Fig. 21
VIEW OF BLADE NOT SQUARE WITH FENCE,
BLADE
MITER
SCALE
Fig. 22
22 - English
MITER
FRAMING
TABLE
SQUARE
ADJUSTMENTS ARE REQUIRED
SCALE
INDICATOR
BLADE
Fig. 23
Fig. 24