INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
the tools listed here.
All Installations
Tools Needed:
Pliers
Phillips screwdriver
5/16" (7.9 mm) and 1/4"
(6.4 mm) nut drivers or hex
sockets
Measuring tape or ruler
10" adjustable wrench that
opens to 1
/
" (29 mm)
1
8
†TORX, T15, and T20 are trademarks of Acument Intellectual Properties, LLC.
8
Flat-blade screwdriver
Utility knife
Small level
5/8" (15.9 mm) open-end
wrench
Torx
T20 and, if installing
†
custom front panels, Torx T15
screwdrivers
Other Useful Items You May Need:
Flashlight
Bath towel
Parts Supplied:
Drain hose clamps (2)
(1 large/red and 1 small/silver)
#8 x 1/2" (12.7 mm) Phillips-head
screws (2)
Make sure all parts are included in the literature package.
Door handle (on some models)
Shallow pan
Masking, or duct tape
Drain hose
Undercounter mounting
brackets (2)