Operation Description - Gima Cardio B Manual De Uso Y Mantenimiento

23
3) At most 1200 data records for quick measurement or 10-hour data records for
continuous measurement can be saved in this device. When the storage space is
full, the device will indicate and prompt that "Memory full! Overwrite record?" with
a display of " " mark as shown in Figure 3-10. Meanwhile, from now on, it won't
store the new record until the user manually deletes the unnecessary data or upload
the records to PC to free some memory.
3.4 Wave Review

3.4.1 Operation Description

1. Select "Review" on main menu screen, then press "
enters record list screen as shown in Figure 3-11
Note:
" ": means the measured result of this record is regular.
" ": means the measured result of this record is irregular.
" ": means waveform with interference or lead off during measuring.
" ": If the enhanced mode is used, the icon of enhanced mode will be
shown behind the record.
NOTE: There is no such legend icon display for the record of
continuous measurement. Only the start and end measuring time (not including the year) is displayed here.
2. Choose a record in record list, then press "
this ECG record, the waveform display for quick measurement and
continuous measurement are shown in Figure 3-12 and Figure 3-13
respectively. To stop auto replay, just press the Navigation key "
" or " / ". After that you can press the Navigation key "
" or " / " again to view the waveforms manually.
On-screen display:
1. "16: 14: 32": ECG waveform measuring time.
2. "X1": ECG waveform gain.
"X1/2": Waveform scaled with half of the basic gain;
"X1": Waveform scaled with basic gain;
"X2": Waveform scaled with twice of the basic gain
"X3": Waveform scaled with three times of the basic gain
3. "HR=66": heart rate value is 66bpm. For waveform review of continuous
measurement, the heart rate value won't be displayed. "1/2": the screen
page description for waveform review of continuous measurement. "1":
current page, "2": total page.
4. " ": Indicating that ECG filter mode is "Enhanced".
5. " ": Status of battery power
6. " ": Reviewed ECG waveform
7. " ": Ruler for 1mV amplitude
8. " ": Compact compression of scaled waveform.
9. " ": ECG waveform selecting box.
Note: The selected waveform in selecting box is displayed on the current screen.
ECG waveform miniature in selecting box is the ECG waveform measured in 30
seconds.
3. Press " OK" button again, the measurement result of the selected record will
be reviewed on the screen, as shown in Figure 3-14.
ENGLISH
OK " button, the device
OK " button to review
/
/
Figure 3-10
Figure 3-11 Record List
Figure 3-12 ECG Data Review Screen
(Quick Measurement)
Figure 3-13 ECG Data Review Screen
(Continuous Measurement)
Figure 3-14