Sharp XE-A303 Manual De Instrucciones página 61

4. Open rate entry programming (Press
(1) Go to (2) when the open rate entry does not need to
be changed from "OPEN ENABLE". Otherwise,
:
press key to display "OPEN DISABLE".
:
Each time key is pressed, the display shows
"OPEN DISABLE" and "OPEN ENABLE" alternately.
Default setting is "ENABLE".
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
5. Preset rate entry programming (Press
(1) Go to (2) when the preset rate entry does not need
to be changed from "PRESET ENABLE".
Otherwise, press
DISABLE".
:
Each time key is pressed, the display shows "PRESET
DISABLE" and "PRESET ENABLE" alternately.
Default setting is "ENABLE".
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
6. Position of decimal point programming (Press
(1) Enter the position of decimal point from right using
numeric key.
The position of decimal point from right can be set
from 0 to 3.
Default setting is 2.
s
(2) Press the
7. Terminate programming
A
(1) Press the
programming.
s
key to register the setting.
:
key to display "PRESEST
key to register the setting.
key to register the setting.
V
key to terminate the
1 2
Part Part
A
to skip. / Press
mms
s
to skip. / Press
s
to skip. / Press
key
3
FOR THE MANAGER
Part
to terminate.)
PRESET RATE
37 PRESET ENABLE
A
to terminate.)
s
TAB
37
A
to terminate.)
TAB
2
37
s
ENTER[TL/NS]KEY
A
2
2
0.00
PGM
0.00
59