Using Your Radio
8.
To.delete.the.FIPS.code,.select.Delete..To.edit.the.code,.select.Edit,.
then.use.the.
of the six digits.
When you are satisfied with the list of FIPS codes, select Exit.to.close.
9.
the.menu.screen.
Changing display and sound options
Contrast
The.VHF650.display.has.10.levels.of.contrast..To.adjust.the.contrast,.press.
the
MENU-PA
the.
CHANNEL UP
desired.level.
To.restore.the.default.contrast.setting,.turn.the.radio.off..Press.the.
button.and.hold.it.in.while.you.turn.the.radio.on.
Lamp adjust
The.VHF650.has.10.brightness.levels.on.the.display..To.adjust.the.
brightness,.press.the.
and.then.Lamp Adjust..Use.the.
change.the.brightness.to.your.desired.level.
Turning the key beep on and off
Key.beep.is.the.tone.that.sounds.when.you.press.a.key.or.a.button..To.turn.
off.the.key.beep,.press.the.
then.Key Beep..Choose.Off to.turn.off.the.key.beep..
Setting the GPS position manually
If.the.radio.is.not.receiving.valid.GPS.data,.the.radio.displays.Input.Position..
Follow.the.steps.below.to.manually.input.your.position.
NOTE:.Be.certain.any.manually-entered.position.is.correct..If.you.enter.the.
wrong.position.and.then.make.a.DSC.distress.call,.you.will.be.telling.the.
Coast.Guard.to.look.in.the.wrong.place.
MENU
CHANNEL UP
.while.the.radio.is.idle..Select.System.and.then.Contrast..Use.
.and.
CHANNEL DOWN
MENU-PA
MENU-PA
Setup
SELECT
GPS Setup
SELECT
.and.
CHANNEL DOWN
.buttons.to.change.the.contrast.to.your.
.button.while.the.radio.is.idle..Select.System.
.and.
CHANNEL UP
.while.the.radio.is.idle..Select.System.and.
Position Set
SELECT
Use the up and down
arrows to adjust each of
the values in turn.
E-23
.buttons.to.change.each.
.buttons.to.
CHANNEL DOWN
--/--
11:22U
o
---
--.- KT
o
35
40.610 N
o
139
46. 564 E
MENU-PA
.
16