Disabling Automatic Channel Switching - West Marine VHF650 Manual Del Usuario

Using Digital Selective Calling (DSC) Features
MENU
1.. Display.the.menu.and.choose.the.DSC Call.sub-menu.
2.. Select.Standby.to.place.your.radio.in.standby.mode..The.radio.displays.
the.standby.screen,.above.
3.. To.cancel.standby.and.return.to.the.mode.your.radio.was.in,.press.any.
button.

Disabling automatic channel switching

If.you.are.involved.in.a.bridge-to-bridge.call,.you.may.not.want.the.radio.to.
automatically.switch.channels.when.it.receives.a.DSC.call..In.cases.like.this,.
you.can.disable.automatic.channel.switching..If.you.receive.an.individual.call,.
the.radio.will.respond.with.an.unattended.code,.just.as.if.the.radio.were.in.
Standby.
1. Press.the.
2. Select.Setup.and.then.Auto CH SW.
3. Highlight.Off.and.press.the.
automatically.switch.channels.until.you.reactivate.this.feature..
NOTE:.Use.this.feature.with.caution..Deactivating.automatic.switching.and.
then.forgetting.it.can.make.it.hard.for.you.to.receive.DSC.calls.
.
.
DSC Call
SELECT Standby
SELECT
.button.to.display.the.menu.
MENU-PA
SELECT-1W/25W
E-38
1 Watt USA
Memory
DSC Standby
Unattended
.button..The.radio.will.not.
88