Puk Codes; Restriction Password; Configuration Settings Service - Nokia 6060 Manual Del Usuario

G e n e r a l i n f o r m a t i o n

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your local service provider
for the codes.

Restriction password

The restriction password (4 digits) is required when using the Call restrictions. See
"Security," p. 55.

■ Configuration settings service

To use some of the network services, such as mobile Internet services and MMS, your
phone needs the correct configuration settings. You may be able to receive the settings
directly as a configuration message. After receiving the settings you need to save
them on your phone. The service provider may provide a PIN that is needed to save
the settings. For more information on availability, contact your network operator,
service provider, nearest authorized Nokia dealer, or visit the support area on the
Nokia Web site at www.nokia.com/support.
When you have received a configuration message Configuration sett. received
is displayed.
To save the settings, select Show > Save. If the phone requests Enter settings' PIN:,
enter the PIN code for the settings, and select OK. To receive the PIN code, contact
the service provider that supplies the settings. If no settings are saved yet, these
settings are saved and set as default configuration settings. Otherwise, the phone
asks Activate saved configuration settings?.
To discard the received settings, select Exit or Show > Discard.
To edit the settings, see "Configuration," p. 54.
12