Puk Codes; Restricting Password; Configuration Settings Service - Nokia 6111 Manual Del Usuario

G e n e r a l i n f o r m a t i o n

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact your local service
provider for the codes.

Restricting password

The restricting password (4 digits) is required when using the Call restrictions.
See "Security," p. 58.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS,
Nokia Xpress audio messaging, or remote Internet server synchronization, your
phone needs the correct configuration settings. You may be able to receive the
settings directly as a configuration message. After receiving the settings you
need to save them on your phone. The service provider may provide a PIN that is
needed to save the settings. For more information on availability, contact your
network operator, service provider, nearest authorized Nokia dealer, or visit the
support area on the Nokia Web site, www.nokia.com/support.
When you receive a configuration message, Configuration sett. received
is displayed.
To save the settings, select Show > Save. If the phone displays Enter settings'
PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,
contact the service provider that supplies the settings. If no settings are saved
yet, the received settings are saved and set as default configuration settings.
Otherwise, the phone asks Activate saved configuration settings?.
To discard the received settings, select Exit or Show > Discard.
To edit the settings, see "Configuration," p. 57.
11