10.1.2 Setting the flash mode on the master
flash unit
• Press sensor button
display for the flash mode until the selecti-
on for the master flash unit appears.
REMOTE
ETTL
MASTER
OFF
RATIO OFF
• Press the
touch display.
A+B+C
O
• Press the sensor button for
MODE
flash mode on the touch display. The set
OFF
mode of operation is adopted immediately.
ETTL
M
10.1.3 Setting the exposure correction (EV)
in ETTL mode on the master flash unit
• Press the sensor button
REMOTE
ETTL
touch display for the master mode as many
MASTER
times as it takes for the master selection to
appear.
RATIO OFF
A+B+C
• Press the
MASTER O
display.
MODE
EV
E TTL
on the touch
MODE
sensor button on the
E TTL
M
or
ETTL
on the
EV
sensor button on the touch
• Press the
O
EV
touch display and set the desired exposure
correction (e.g. 1).
2/3
• Press the sensor button for the desired
1
exposure correction value
1 1/3
The setting is adopted immediately.
p
q
10.1.4 Lighting conditions (RATIO) for the
flash groups settings on the master
flash unit
The lighting conditions of the flash groups (A,
B, C) can be set proportionally in order to
obtain specific lighting effects. The lighting
conditions for all groups are controlled exclu-
sively via the master flash unit.
• Press the
for the selection menu to appear.
• Press the
PARAMETER
touch display.
O
PARAMETER
• Press the
ZOOM
touch display.
RATIO
• Press the desired sensor button on the
CHANNEL
touch display:
A+B+C
all three groups are the same (RATIO Off).
O
RATIO
A : B
Ratio of group A to group B.
A + B +C
A : BIC
Ratio of group A to group B plus an
exposure correction (EV) for group C.
A : B
A : B I C
The setting is adopted immediately.
sensor buttons on the
1
.
D
button as often as it takes
PARA
sensor button on the
RATIO
sensor button on the
183
k