Roland RP301R Manual Del Usuario página 27

Display Function Setting
LocalCtl
Local Control
ON
USB Drv
USB Driver
GEN
Auto Off
Auto Off
30
CopySong
Copy Song
Del Song
Delete Song
Format
Format Media
Backup
Memory Backup
Value Explanation
Preventing Double Notes when Working with a Sequencer
(Local Control)
When you have a MIDI sequencer
connected, set this parameter to "OFF".
Since most sequencers have their Thru
function turned on, notes you play
on the keyboard may be sounded in
duplicate, or get dropped. To prevent
this, select "OFF" so that the keyboard
and internal sound generator will be
disconnected.
ON (default) Local Control is on. The keyboard and internal sound generator are connected.
Local Control is off. The keyboard and internal sound generator are disconnected. Playing the
OFF
keyboard will not produce sound.
Choosing the USB driver
If you're trying to connect the RP301R to your computer via a USB cable, but are unable to connect
successfully, using the Roland original driver may solve the problem. Normally, you don't need to
install a driver. However, if some problem occurs, or if the performance is poor, using the Roland
GEN (Generic), original driver may solve the problem. After setting "USB Drv" to "ORG" on the unit, install the driver
ORG (Original) on your personal computer. After changing this setting, you need to save your changes using
(default: GEN) Memory Backup (p. 23), turn off the RP301R, then turn it back on again.
For details on downloading and installing the Roland original driver, refer to the Roland web site.
GEN
ORG
Refer to "Making the power automatically turn off after a time (Auto Off )" (p. 29).
Refer to "Copying song files" (p. 28).
Refer to "Deleting Song files" (p. 28).
Refer to "Initializing the memory (Format Media)" (p. 29).
Refer to "Saving the Settings (Memory Backup)" (p. 23).
Various settings (Function mode)
Local Control
MIDI
In
Sound Generator
MIDI
Out
Choose this if you want to use the standard USB driver that was
included with your computer. Normally, you should use this mode.
Choose this if you want to use a USB driver downloaded from the
Roland web site (www.roland.com).
MIDI
Sequencer
27