About This Document - Wilo Stratos ECO Serie Instrucciones De Instalación Y Funcionamiento

English
1 General
Installation and operating instructions

1.1 About this document

These installation and operating instructions are an integral
part of the product. They must be kept readily available at the
place where the product is installed. Strict adherence to these
instructions is a precondition for the proper use and correct
operation of the product.
These installation and operating instructions conform to the
relevant version of the product and the underlying safety
standards valid at the time of going to press.
2 Safety
These instructions contain important information which
must be followed when installing and operating the pump. It
is therefore imperative that they be read by both the installer
and the operator before the pump is installed or operated.
Both the general safety instructions in this section and the
more specific safety points in the following sections should
be observed.
2.1 Instruction symbols used in this operating manual
Symbols:
General danger symbol
Hazards from electrical causes
NOTE: ...
16 Wilo AG 06/2005